With proper care, your Aquaglide towable should last for years. Keep your Aquaglide inflatable away from sharp items, barnacles and heavy abrasion. Sliding the inflatable hull over grass or soft sand is OK, but be certain to check for hidden items or shells that may puncture or cut the bladder. Avoid contact with any surface that could splinter, cut or puncture the bladder.
Salt water use is fine, but whenever possible, rinse your Aquaglide product with fresh water after use. Never use harsh chemicals, bleach or abrasives to clean the hull and/or cover. A few ounces of mild liquid dish soap in a gallon of water should help to loosen accumulated dirt from the cover, if needed. After using mild soap, rinse well with clear water. Be certain to dry thoroughly before stowing.
Using an electric pump on deflate setting (such as the Turbo 110v or 12v pumps) is the best way to remove all remaining air in the bladder. Use a forefinger to pull the valve flap to the outside of the valve (Rapid-inflate valve), or remove the valve cap (Boston valve) allowing air to flow freely from the bladder chamber. Fold and flat-roll toward the valve, pushing air out as you go. Store in a cool, dry location, away from sun exposure.
Click here to view the features of the AquaGlide product line
No comments:
Post a Comment